Xray introduce the low traction chassis for the T2, T2R, T2'007, T2'008, T2'009 and Xray T3. The new 2mm chassis was developed to provide more traction for low-grip surfaces. The thinner chassis allows the car to flex more which generates more overall traction. Xray recommends to use 0.5mm shims under all lower suspension blocks (given the chassis in question make use of them) as the chassis is thinner than the stock ones. The washers are needed to retain the given roll-centre setting. Available are a 2.0mm lower and a 1.6mm upper chassis plate. The thinner top deck also generates more in-corner steering.
#301133 T3'12 Graphite Chassis 2.0mm
#301194 T3'12 Graphite Upper Deck 1.6mm
Link: Xray T2/T3 low-traction chassis
